

A = Distance between fixing centres 48mm
B = Step from face of sash to face of frame 16mm
Step 0 -26mm can be accommodated
STRDU03
For use on PVC-U frames
0-26mm step can be accommodated
Stylish design and simple to adjust to accommodate different steps
Adjustable body - no need for packers
Suitable for top hung opening out windows.
Tested to over 100,000 cycles.
150mm throw, folding action to open and close sash
Over centre design means that the opener 'locks' securely into place when the window is closed
The link bar will divide the opening gap in half which means that the opening will effectively become approximately 75mm which is well within the guidelines for second storey and higher windows
A minimum sash height of 250mm is required where butt hinges are fitted or 400mm where friction hinges are used
One, two or three openers may be required depending on the size of the window
Single opener for sash width up to 500mm
Two openers plus link bar for sash width 600mm to 900mm
Three openers plus link bar for sash width 900mm to 1500mm
300mm, 600mm, 900mm, 1000mm and 1200mm link bars available depending on sash width
We recommend that the link bar is 2/3 to 3/4 of the sash width
Link bar can be easily cut to exact size required
Centre ring (STRX02) may be used to enable a pole operator to be used
Pole operator for high level windows (X028) available in 1, 1.5 or 2m length
Pole operators are not recommended for windows above 3m from finished floor level or where windows are in a deep reveal
Ordering Information
Part code - STRDU0320
Description - Duoflex opener stepped silver
Pack size - 30 (can be supplied in any quantity)
Part code - STRDU0325
Description - Duoflex opener stepped white
Pack size - 30 (can be supplied in any quantity)
Part code - STRDU0301
Description - Duoflex opener stepped black
Pack size - 30 (can be supplied in any quantity)
Part code - STRDU0343
Description - Duoflex opener stepped polished brass
Pack size - 30 (can be supplied in any quantity)
Part code - STRDU0344
Description - Duoflex opener stepped satin stainless steel plated
Pack size - 30 (can be supplied in any quantity)
Other sizes and finishes available to special order
Specification Information
STRDU03 suitable for PVC-U frames with 0-26mm step
Top hung outward opening windows
Sash width up to 1500mm (one, two or three openers can be used depending on sash width)
Two or Three Openers can be used together with a link bar
Link bar should be 2/3 to 3/4 sash width
Fitting Instructions
Certification
Tested to over 100,000 operations
Patent approved GB24902896
12 month warranty