Motorised device can be used with a variety of access entry systems such as digital keypad, proximity reader or swipe card system to allow controlled access from outside. The panic touch bar will always override this and be operable from inside to allow safe egress.

Motorised three point touch bar bolt for use on a single door (timber, metal or PVCu), the inactive leaf of a pair of rebated doors or both leaves of a pair of straight edged doors.

Comprises a touch bar containing a motor, modular mechanism and covered connecting rods and vertical latching pullman latches at the top and bottom. Motor operates on 12-24v DC (stabilised) or 12v AC. 2 amp power supply.

The centre mechanism can be blanked off with plate supplied to convert it into a two point device when using it on double doors.

Can be supplied with dogging but not supplied as standard.  The dogging (hold-back) facility should not be used on fire/smoke door assemblies but fine for escape doors. If dogging is required please state when ordering.

Standard size - 840mm suitable for doors upto 860mm wide, longer version - 1170mm for wider doors available.  Suits doors upto 2585mm high as standard, longer rods are available to suit doors upto 3150mm high.

Micro-switch can be fitted in the mechanism, this allows the door to be fitted to equipment that monitors the door status. If required state when ordering.

Supplied with strikers for timber or metal doors as standard - strikers for PVCu available separately

Optional outside access devices are available to provide entry from outside

Part code - PHTM50320
Description - motorised 3 point touch bar bolt 840mm, silver

Part code - PHTM50325
Description - motorised 3 point touch bar bolt 840mm, white

Part code - PHTM50301
Description - motorised 3 point touch bar bolt 840mm, black

Part code - PHTM50344
Description - motorised 3 point touch bar bolt 840mm, satin stainless steel plated

Part code - PHTM50381
Description - motorised 3 point touch bar bolt 840mm, black with green touch bar front

Part code - PHTM50380
Description - motorised 3 point touch bar bolt 840mm, black with silver touch bar front

Part code - PHTM50382
Description - motorised 3 point touch bar bolt 840mm, silver with green touch bar front

For 1170mm version use codes above but replace the zero with a 1. E.g.
Part code - PHTM51320
Description - motorised 3 point touch bar latch 1170mm, silver

If dogging is  required please state on order

If microswitch is required state on order

Other colours and finishes available to special order

Touch bar panic devices can be fitted to doors in public buildings such as schools, hospitals, retail outlets, nightclubs etc where people are unfamiliar with the surroundings. PHTM5 motorised three point touch bar bolt is suitable for single doors, the inactive leaf of a pair of rebated doors or both leaves of a pair of straight edged doors. 

Motorised devices can be connected to a variety of access entry systems such as digital keypad, proximity reader or swipe card systems that allow controlled access from the outside. The touch bar will always override this and operate from the inside to allow safe egress. 

Motorised touch bar instructions

Tested and certified to EN 1125:2008 - classification 3-7-7-B-1-4-2-2-B-A

CE / UKCA Marked

Certifire approved 240 minutes
(Certifire CF5394)

Two year warranty (conditions apply)

Declaration Of Performance (CE)

Declaration Of Performance (UKCA)